Power Adaptor Connection; Basic Initialization - Denwa Communications DW-310P User Manual

Step 2: Connect the handset to the handset port by the handset cable in the
package.
Step 3: connect the power supply plug to the AC 5V adapter port on the
back of the phone. Use the power cable to connect the power supply to a
standard power outlet in your workspace.
Step 4: push the on/off switch on the back of the phone to the one side,
then the phone's LCD screen displays "Initializing wait logon". Later, a ready
screen typically displays the date, time.
If your LCD screen displays different information from the above, you need
refer to the next section "Initial setting" to set your network online mode.
If your VoIP phone registers into corporate IP telephony Server, your phone is
ready to use.

2.1.2 Power adaptor connection

Make sure that the power you use is comply with the parameters of power
adaptor.
1. Plug power adaptor to power socket.
2. Plug power adaptor's DC output to the DC5V port of DW-310/DW-310P to
start up.
3. There will be displayed black line and "INITIALIZING" on the screen. After
finishing startup, phone will show greeting, current date and time and so
forth.
4. If phone has registered to the server, you can place or answer calls.
2.2

Basic Initialization

DW-310/DW-310P is provided with a plenty of functions and parameters for
configuration. User needs some network and VoIP knowledge so that user
could understand the meanings of parameters. In order to make user use the
phone more easily and convenient, there are basic configurations introduced
which is mandatory to ensure phone calls.