Installation; Hardware Installation - TRENDnet TV-IP342PI User Manual

TRENDnet User's Guide
Camera Connectors
Power Speaker
Ethernet /PoE
Connector Out
Port

Ethernet/PoE Port: Plugs the network cable to connect to your local area
network (LAN). If you are using the PoE, you must have the network cable
connect to your PoE switch or PoE Injector.

Power Connector: Connects the power adapter to supply power to the camera
if using non-PoE connection

Speaker Out: Connects an external audio device (such as the active speaker) to
deliver sound via the camera.

Microphone In: Connects an external microphone to receive the on-the-spot
sound where the camera is installed

BNC Video Out: Connect a CRT monitor or handheld monitor.

GPIO Port: Connect external device. Please refer to I/O setting paragraph. It's
also used for IP camera reset. Please refer to Factory Default paragraph.
© Copyright 2014 TRENDnet. All Rights Reserved.
BNC
GPIO
Microphone
In Video Out Port
.

Installation

Hardware Installation

Viewing Angle
Choose a location that has good angle to shoot the image you expect to see. The motion
detection area should also be considered when installing the camera.
Manual Pan/Tilt
The camera can manual pan/tilt to your desired location.
Vari-Focal Lens
The camera equipped with external vari-focus lens control. Achieve clear focus by
adjusting the zoom/focus button.
TV-IP342PI
4