Network - TRENDnet TV-IP342PI User Manual

TRENDnet User's Guide
Backup: Click Backup to back up the camera configuration file that will be
saved on the local computer. A password is required to save a configure file.
You will need to enter the same key when restoring the configure file to the
camera.
Restore: Click "Browse..." to select the configure file from your computer then
click Restore to restore all setting. A previous saved password on this configure
file is required to restore configure file.

NETWORK

© Copyright 2014 TRENDnet. All Rights Reserved.
Network >> Network Setting >> IP Address Setting

DHCP: Select this option when your network uses the DHCP server. When the
camera starts up, it will be assigned an IP address from the DHCP server
automatically.

Static IP: Select this option to type in IP address, subnet mask, gateway, and DNS
manually. Default IP address is 192.168.10.30 if the camera doesn't connect with
DHCP server. DNS (Domain Name System) translates domain names into IP
addresses. Enter the Primary DNS and Secondary DNS that are provided by the ISP.
Network >> Network Setting >> IPv6 Setting
IPv6 is a newer numbering system that provides a much larger address pool than IPv4,
which accounts for most of today's Internet traffic. You can manually enter IPv6 address
, enable DHCPv6 to get IPv6 address automatically.

Manually setup the IPv6 address: You can set up IPv6 manually by enter IP Address,
Gateway, and DNS.

DHCPv6: If you have a DHCPv6 server, enable this option to assign the IPv6 from
server. The assigned IP address will be displayed
TV-IP342PI
14