TRENDnet TV-IP342PI User Manual page 40

TRENDnet User's Guide
5. When I click on Live View the image does not load, what should I do?
a. If you are using Internet Explorer, make sure that you install the ActiveX
control WEBWATCH.cab.
b. If you are using non-IE browser (Firefox, Chrome, Safari), make sure that
you install the plug-in WebPlugin.exe.
6. How do I uninstall the browser's Active X or Plug-in from my computer?
Click Computer Icon, type in "np_hoem_x.dll" on the top-right corner of the search
bar, then click "Search".
Delete the file named "np_hoem_x.dll" from search result.
Search for the additional ActiveX or plug-in files listed below and delete them to
completely uninstall the ActiveX control or plug-in from your computer.
© Copyright 2014 TRENDnet. All Rights Reserved.

avcodec-53_v1.8.dll

avutil-51_v1.8.dll

swscale-2_v1.8.dll

WEBWATCH2

WEBWATCH2.ocx
7. I forgot my password. What should I do?
Please follow the steps below to reset to factory default setting
a. Remove the power and network cable.
b. Remove the cover of the camera
c. Press and hold the reset button for 10 seconds and wait for the camera to
finish rebooting (up to 2 minutes).
d. Run the install camera wizard from the CD-ROM to login to the camera.
TV-IP342PI
39