TRENDnet TV-IP342PI User Manual page 32

TRENDnet User's Guide
Event Configuration >> Motion Detection >> Record Time Setting
When an event occurs, the IP camera can record a video clip or take snapshot, and then
send to mail/ FTP/ Samba. Select the video recording length before and after event
occurs.
Event Configuration >> Motion Detection >> Network Disconnected
When enabled, the live view will be stored into the SD card if the IP Camera detects no
Internet Connection (the SD card must be pre-installed)
Event Configuration >> Motion Detection >> Network IP Check
Enter the target IP address and interval. The camera will base on the interval time to
check the target IP address. If PIN failed 4 times, the camera itself will reboot.
© Copyright 2014 TRENDnet. All Rights Reserved.
Event Configuration >> Sound Detection >> Sound Detection

When enabled and the camera detects sound, the IP camera can record a video clip
or take snapshot, and then send the file to mail/ FTP/ Samba. Select what format
you want to save.

Detection Level: Selects the decibels value (for the camera to trigger sound
detection).
TV-IP342PI
31