TRENDnet TV-IP342PI User Manual page 13

TRENDnet User's Guide
System >> System Information >> OSD Setting

Time Stamp: Enable or disable the time that will show on the live screen.
Position: After enabling time stamp, you can select the position of time stamp
on the live screen.

Text: Enable the Text option to have the desire text show on the camera live screen.
Text Edit: Click it to call out "text edit" window:
Text: Key in the words you want to show on the live screen.
Opaque: Set the background transparency of the text.
© Copyright 2014 TRENDnet. All Rights Reserved.
System >> System Information >> Time Setting

Server Time: It shows current IP camera server time.

Date Format: Select the date display format.

Time Zone: Select your time zone. It affect server time when you use "NTP" time.

Enable Daylight Saving: select the start and end daylight saving time.

NTP: Type in the IP address of the NTP server and interval time. The time of the IP
camera will be synchronized with NTP server time. To use this option, if the NTP
Server is under WAN, the IP camera must be set to access WAN ( Using the WAN IP
that provide by your ISP provider, or setup by UPnP Port Forwarding (page 18)

Synchronize with PC's time: In "Date" and "Time" column it shows your current PC
time. Click "Apply" to make the IP camera time the same with PC time. Note that IP
camera will not check with PC at every moment automatically. Every time when you
want to synchronize the IP camera time with PC time again, please select this
option and click "Apply".

Manual: Type in the date and time, and click "Apply".
TV-IP342PI
12