TRENDnet TV-IP342PI User Manual page 14

TRENDnet User's Guide
System >> User Management

Direct Video Stream Authentication:
To stream the video directly without going through the configuration page, you can
access it via Internet.
Stream 1 Video: http://camera_ip_address:port/stream1view.htm
Stream 1 Video: http://camera_ip_address:port/stream2 view.htm

Enable Password Protection:
Yes: User needs to enter user name and password to stream the camera.
No: User can stream the camera without entering the username and
password.

Add user: Enter the username and password to add guest users to access the
camera. The guest user can only view the live view video and is not allowed to do
any configuration.
© Copyright 2014 TRENDnet. All Rights Reserved.

User List: List all users that were added into the camera. Click "Edit" to modify
the user information. Click "Remove" to remove the users from the list.
System >> Tools

Firmware Upgrade:
To update the firmware, click "Browse" to select the firmware, then click
"Upgrade" to proceed. Please do not disconnect power or Network cable during
firmware upgrading.

System Reboot: Click Reboot to reboot the IP camera.

Factory Reset: Click Reset to reset all the settings back to factory default value

Configuration:
TV-IP342PI
13