How To Switch The Cable Access Port - TRENDnet TV-IP342PI User Manual

TRENDnet User's Guide

How to Switch the Cable Access Port

1. Unscrew and open the camera's dome cover
2. Loosen the sun shield starting from one side then to the other side, then take off
the sun shield.
st
3. Remove the 1 cable from PCB board.
nd rd th
4. Remove the 2 , 3 and 4 cable from PCB board.
© Copyright 2014 TRENDnet. All Rights Reserved.
5. Unscrew the meter cover on the side.
6. Twist the water proof nuts and careful remove all cables out form the bottom of
the housing.
7. Insert the cable into the side of the housing
TV-IP342PI
35