Configuration; Viewing Camera Basic Function - TRENDnet TV-IP342PI User Manual

TRENDnet User's Guide

Configuration

Viewing Camera Basic Function

Open the Web browser on your computer (example showed in this User's Guide is
based on the Internet Explorer). In the Address bar, type the IP address you got from
"Camera Installation" chapter or found by IP Installer, and then press [Enter].
When the login window appears, enter the User name (admin) and Password and press
OK to access to the main screen of the camera's Web Configuration.
Note: if you are initially access to the camera, you will be prompted to install a new
plug-in for the camera. Permission request depends on the Internet security settings of
your computer. Click Allow and Install to process.
© Copyright 2014 TRENDnet. All Rights Reserved.
After you login into the live screen of the camera, the main page will appear as below:
The live screen of the IP camera configuration provides you with many useful
information and functions, including:

SETUP : Click the button to configure the camera.

SNAPSHOT: Click the button to take a snapshot. The snapshot will pop up another
window for your review first. Right click the mouse to save the snapshot at the
desire destination.
System Information: It shows current system Date, Time, Video Resolution, and

Video Refreshing Rate.

Digital Zoom: The drop down menu has 3 images size available, 1/2x, 1x and 2x. The
default is 1/2x.

Streaming Profile: Use the drop down menu to select Streaming 1 & Streaming 2
video. (If the streaming 2 setting is closed on "AUDIO/VIDEO SETTING >> Video",
this option will not appear)
TV-IP342PI
9