Table of Contents
Advertisement
Cautions
Injury or equipment damage may be caused if any of these cautions are
neglected. Follow these precautions to prevent potential injury or material
damage.
• Make sure the power supply voltage is correct before using the Camera.
• Do not drop the camera or subject to physical shock.
• Do not touch sensor modules with fingers. If cleaning is necessary, use
a clean cloth with a bit of ethanol and wipe it gently. If the camera will
not be used for an extended period of time, put on the lens cap to
protect the sensor from dirt.
• Do not aim the camera lens at the strong light such as the Sun or an
incandescent lamp. Strong light can damage the camera sensor.
• The sensor may be burned out by a laser beam, so when any laser
equipment is being used, make sure that the surface of the sensor will
not be exposed to the laser beam.
• Do not place the camera in extremely hot, cold temperatures (the
operating temperature should be between ‐10°C to 60°C), dusty or
damp environment, and do not expose it to high electromagnetic
radiation.
• To avoid heat accumulation, good ventilation is required for a proper
operating environment.
• Keep out of water and any liquid.
• While shipping, the camera should be packed in its original packing.
Plan for installation location
Viewing Angle
The TV‐IP313PI is a bullet camera with a focused viewing angle that provides
non‐distorted and detailed images. Choose the location where has good
angle to shoot the image you expect to see. The motion detection area should
also be considered when installing the camera.
Weather Conditions
The TV‐IP313PI is a small bullet camera, which fits most installations indoor
and outdoor. The camera can work under a wide range of weather conditions.
For severe weather conditions, a camera housing with temperature and
moisture control is recommended. Using the camera in milder weather
conditions will help extend the camera's product life and preserve the quality
of the video image.
• Moisture: Avoid damp or moist environments whenever you can. The
TV‐IP313PI is an IP67 grade water proof camera, and it will work in
moist environments. However, rain may affect the picture quality,
especially at night, water may reflect the light from the infra‐red
illumination and degrade picture quality.
• Temperature: TV‐IP313PI works within a specified temperature range.
Areas with severe temperatures should be avoided when installing the
camera. It's recommended that you use an enclosure with a heater and
blower if you plan on using this camera outside of the specified
temperature range.
Advertisement
Table of Contents
