Table of Contents
Advertisement
TRENDnet User's Guide
Installation
Wired Connection
1. Connect the Ethernet Cable. If you intend to use the network camera as a wired
device, connect one end of the included Ethernet cable into the Ethernet port
on the rear panel of the camera and connect the other end to an available port
on your network. If you prefer to use the camera on a wireless network, see
below for instructions on connecting the power adapter.
© Copyright 2013 TRENDnet. All Rights Reserved.
2. Attach the Power Supply. Attach the included power supply to the DC 12V 1.0A
receptor on the rear panel of the camera and then connect it to a wall outlet or
power strip. A blue LED will light up under the lens indicating that the camera
has power.
TV-IP562WI
3
Advertisement
Table of Contents
