How To Access The Ip Camera Via Ip Installer - TRENDnet TV-IP342PI User Manual

TRENDnet User's Guide

How to Access the IP camera via IP Installer

The IP Installer is an optional utility allow you to search the cameras in your network
easily.
1. Insert the Installation CD-ROM into your computer's CD-ROM drive.
2. Click Exit if the Autorun pop up.
3. Go to Start >> type in D:\\ (D: is the letter assigned to your CD-ROM Drive, and then
press the ENTER.
4. Click IPInstaller Folder and click IP Installer.exe
5. The main screen will pop up.

Search : Search the IP Camera within the Network

Access Camera: access the selected camera's web page.

Change : change the selected camera's IP address via Static IP or DHCP.
© Copyright 2014 TRENDnet. All Rights Reserved.
If Static is selected, you have to manual type in the IP address, Subnet Mask,
Default gateway, DNS 1, DNS 2 and Http Port and IP camera's password.

Exit: Exit the IP Installer Utility.
TV-IP342PI
37