TRENDnet TV-IP342PI User Manual page 11

TRENDnet User's Guide

Speaker/Microphone: Click the "Mic" to speak out through the camera. Click the
"Speaker" to receive the on-side sound and voice from the camera.

Online Visitor: It shows how many people connect to this IP camera.

Relay On: Click the Relay out "ON" to trigger the relay output for testing. click "Off"
to stop triggering. To switch between these two types of relay out, please refer to
Event Configuration >> GPIO Setting session for detail.

Logout: Click to logout the camera

One the live view video, right click the mouse for the additional menu options.

Snapshot: Save a JPEG picture

Record Start: Record the video in the local PC. It will ask you where to save the
video. To stop recording, right-click the mouse again. Select "Record Stop". The
video format is AVI. Use Microsoft Media Player to play the recorded file.

Mute: Turn off the audio. Click again to turn on it.
The "mute" button does not affect the playback recording video. As long as the "2-
Way Audio" option in the audio setting is enabled, all the audio will be recorded
into the playback video even you click "mute" in the live page.

Full Screen: Full-screen mode.

Zoom: Enable zoom-in and zoom-out functions. Select "Enable digital zoom" option
first within the pop-up dialogue box and then drag and drop the bar to adjust the
zoom factors.
© Copyright 2014 TRENDnet. All Rights Reserved.

Frame Buffer mSec: This function is to build a temporary buffer to accumulate
several video frames. This function can make video smooth-going when the
Network speed is slow and lag. If you select "100", then it plays video after 100
mSec when starting receiving images from camera. The slower of the Network is,
the bigger value should be selected. The default value is null.
TV-IP342PI
10