Camera Installation - TRENDnet TV-IP342PI User Manual

TRENDnet User's Guide

Camera Installation

1. Insert the Installation CD-ROM into your computer's CD-ROM drive to initiate the
Auto-Run program. Click the Install Camera.
2.
3. Write down the MAC ID of the camera.
© Copyright 2014 TRENDnet. All Rights Reserved.
4. Plug in and connect the power adapter to the camera. If you are using the PoE to
supply power to the camera, please skip to the next step. Click Next when you are
done.
5. Connect a network cable to the camera's network port and then to your router. If
you are using PoE, please ensure the cable is connected to a PoE switch or PoE
injector.
TV-IP342PI
6