Table of Contents
Advertisement
TRENDnet User's Guide
System Configuration
Device Settings
Setup your camera name and location for easy identification. This camera
name will also be recognized by other network camera software as the name
of this camera. OSD, On Screen Display, camera name is referring to this
setting as well.
Names
Camera Name: Name of the camera. The camera name setup
here can be discovered by other network camera
software and OSD, On Screen Display. The default
camera name is the model number: TV‐IP318PI
Location: Label where you installed this camera for reference
© Copyright 2017 TRENDnet. All Rights Reserved.
Authentication
RTSP: TV‐IP318PI's video stream can be accessed with
RTSP, Real Time Streaming Protocol. Only the
administrator and users can view this video stream
Un‐checking this box will allow everyone access to this video
stream without authentication. Default: Checked.
Service
Enable
TV‐IP318PI embedded Telnet service for multiple camera
Telnet:
control for system developer. Default: disabled.
TV‐IP318PI
25
Advertisement
Table of Contents
