Network Camera Setup - Xineron FASTRAX III Instruction Manual

Use this scale to control the volume of the speakers.
Use this scale to control the volume of the microphone.
Use this scale to control the volume of the speakers and microphones.
3) Camera Menu controls
If the network camera has been appropriately configured, the Live View page displays the controls
available for the OSD menu.
For more information, please see "Chapter 3 — Program and Operation".
4) Pan/Tilt/Zoom controls
If the network camera has been appropriately configured, the Live View page displays the controls
available for the PTZ (Pan Tilt Zoom) or PT device installed. The administrator can enable/disable the
controls for specified users.
Please see "4.6 PTZ Control" for more information.
5) Video and Audio Streams
The network camera provides several images and video stream formats. Your requirements and the
properties of your network will determine the type you use.
The Live View page in the network camera provides access to H.264, MPEG-4 and Motion JPEG
video streams, and to the list of available video streams. Other applications and clients can also
access these video streams/images directly, without going via the Live View page.

4.5 Network Camera Setup

This section describes how to configure the network camera, and is intended for product Administrators,
who have unrestricted access to all the Setup tools; and Operators, who have access to the settings for
Basic, Live View, Video & Image, Audio, Event, and System Configuration.
You can configure the network camera by clicking Setup in the top right-hand corner of the Live View page.
Click on this page to access the online help that explains the setup tools.
When accessing the network camera for the first time, the "Admin Password" dialog appears. Enter your
admin name and password, set by the administrator.
Note: If the password is lost, the network camera must be reset to the factory default settings. Please see
"4.8 Resetting to the Factory Default Settings".