Related Manuals for Xineron XIN-MPC-0110
Summary of Contents for Xineron XIN-MPC-0110
-
Page 1: Network Camera
Quick Installation Guide HD Mini Cube Network Camera Please read this manual thoroughly before use, and keep it handy for future reference. - Page 2 DSP compression chip, and makes it available on the network as real-time, full frame rate Motion JPEG and H.264 (or MPEG-4) video streams. Network Camera Features H.264, MPEG4 and MJPEG XIN-MPC-0110 Wired and Wireless interface Micro-SD H.264, MPEG4 and MJPEG Wired interface...
-
Page 3: Installation Steps
Package Component The system comes with the following components: Cube Camera Installation CD Installation Guide Stand Adaptor Note: Check your package to make sure that you received the complete system, including all components shown above. • Front View [XIN-MPC-0110] [XIN-MPC-0110W]... -
Page 4: Camera Dimension
• Rear View Name Description XIN-MPC-0110/XIN-MPC-0110W is equipped with a PIR Sensor that has a PIR Sensor maximum range of 5 meters for detecting movement in the dark. XIN-MPC-0110/XIN-MPC-0110W is equipped with a Microphone and Microphone/Speaker Speaker. Two-way audio support allows for remote users to listen in on an area and communicate with visitors or intruders. -
Page 5: Installation
Connect the supplied DC 5V power adaptor to the camera. • Connecting the Wireless using WPS button XIN-MPC-0110, XIN-MPC-0110W supports the wireless function. Follow steps for a proper operation. 1. Make sure your AP (Access Point) and Operating System support WPS (Wi-Fi Protected Setup) functions. -
Page 6: Network Connection And Ip Assignment
Notes: 1. WPS may not work if your AP is configured with a "hidden" SSID. 2. If any WPS-enabled AP is not detected, the camera will search APs for 60 seconds after pressing the WPS button, and if the camera still can not detect an AP after 1 minute, the wireless setup will be cancelled. - Page 7 Select the camera on the list and click right button of the mouse. You can see the pop-up menu below. Select Assign IP. You cam see a Assign IP window. Enter the required IP address. Note: For more information, refer to the Smart Manger User’s Manual.
-
Page 8: Operation
3. Operation The Network Camera can be used with Windows operating system and browsers. The recommended browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with Windows. Note: To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls. -
Page 9: Access From The Internet
3.2. Access from the internet Access from the internet once connected, the Network Camera is accessible on your local network (LAN). To access the network camera from the Internet you must configure your broadband router to allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the network camera. -
Page 10: Control Toolbar
The resolution drop-down list allows you to select the most suitable one out of video resolutions to be displayed on live view page. The protocol drop-down list allows you to select which combination of protocols and methods to use depends on your viewing requirements, and on the properties of your network. -
Page 11: Resetting To The Factory Default Settings
When accessing the Network Camera for the first time, the “Admin Password” dialog appears. Enter your admin name and password, set by the administrator. Note: If the password is lost, the Network Camera must be reset to the factory default settings. See “3.6 Resetting to the Factory Default Settings”. - Page 12 HD Mini Cube Network Camera Printed in Korea...