Table of Contents
Advertisement
- Multicast destination IP: Enter an IP between 224.0.0.0 and 239.255.255.255. Although it is
empty, an IP will be entered automatically.
- RTP port: Enter a value between 1024 and 65532.
- RTP TTL: Enter a value between 1 and 255. If a network status is smooth, enter a lower value.
On the other hand, if a network status is poor, enter a higher value. When there are many
network cameras or users, a higher value may cause a heavy load to the network. For a
detailed setting, please consult with a network manager.
④ ④ ④ ④ UPnP
The network camera includes support for UPnP™. UPnP™ is enabled by default, and the network
camera then is automatically detected by operating systems and clients that support this protocol.
Note: UPnP™ must be installed on your workstation if running Windows XP. To do this, open the
Control Panel from the Start Menu and select Add/Remove Programs. Select Add/Remove
Windows Components and open the Networking Services section. Click Details and then select
UPnP™ as the service to add.
Advertisement
Table of Contents
