Ip Assignment - Xineron FASTRAX III Instruction Manual

2.6 IP Assignment

When the dome camera, encoder or decoder is first connected to the network it has no IP address. So, it
is necessary to allocate an IP address to the device with the "SmartManager" utility on the CD.
1. Connect the dome camera / device to the network and power up.
2. Start SmartManager utility (All programs > NautilusClient16 > SmartManager), the main window will be
displayed, after a short while any network devices connected to the network will be displayed in the list.
3. Select the dome camera on the list and click right button of the mouse.
You can see the pop-up menu as below.
4. Select Assign IP Address. You can see Assign IP window. Enter the required IP address.