Chapter 3 - Program And Operation; Dome Camera Selection; Accessing On-Screen Menu Utility; How To Control On-Screen Menu Utility - Xineron FASTRAX III Instruction Manual

Chapter 3 — Program and Operation

3.1 Dome Camera Selection

Before you program or operate a dome camera, you must select the dome camera by pressing the dome
camera No. + CAM
Example: Pressing 1 , 0 and CAM key sequentially will select dome camera 10. The selected dome
camera ID will be displayed on the LCD monitor of the keyboard controller.
3.2 Accessing the On-Screen Menu Utility
You can call up the On-screen menu utility on your monitor by pressing MENU key on the keyboard
controller, the following On-screen menu utility will appear:
3.3 How to control the On-Screen Menu Utility
Function
Call the On-screen menu utility
Navigate through the menu items.
Go into the sub-menu items.
Change value.
Enter the editing title mode.
Change value of angle
Enter the changing angle mode.
Exit the changing angle mode.
Escape (EXIT)
DOME MENU
AUTO SCAN
PRESET
TOUR
PATTERN
AREA TITLE
PRIVACY ZONE
CAMERA
DOME SETUP
FUNCTION RUN
EXIT(ESC TO EXIT)
Button
MENU
Joystick up or down
Joystick left or right
or IRIS Open
Joystick left or right or
Zoom handle twist or
Tele , Wide
CTRL + Joystick
IRIS Open
IRIS Close
ESC