Table of Contents
Advertisement
CALIBRATION
PASSWORD ENABLE
MENU TIME OUT
BLINK CURSOR
DOME ANSWER
helpful to escape the collision of the command using some DVR.
MOTOR SETUP
Motor Setup menu provides the pan and tilt speed of a camera. User can set the desired speed with twist
the Joystick left or right. During operation, pressing 153 + ON will change the speed to the SLOW mode
and pressing 153 + OFF will change the speed to the Normal mode.
Holding and pressing CTRL and moving the joystick will operate with the TURBO speed mode.
PROPOTIONAL P/T
P/T MODE
SLOW PAN MAXIMUM
SLOW TILT MAXIMUM
NORMAL PAN MAXIMUM : 40 ˚ - 360 ˚ /second
NORMAL TILT MAXIMUM : 40 ˚ - 200 ˚ /second
TURBO PAN MAXIMUM
TURBO TILT MAXIMUM
PASSWORD EDIT
You can change the password with 6-digit character in this menu.
The default password is 555555 .
When the password enable is on, the input password window displays to enter the menu.
At this time, move the cursor to the desired character by the joystick and press CTRL or IRIS OPEN .
: ON (Auto origin check) / OFF
: ON (requires the password to enter menu) / OFF
: ON(5mintues) / OFF( always menu display)
; ON / OFF(no blinking cursor)
; ON / OFF(no acknowledge command from the dome) This option is
MOTOR SETUP
PROPOTIONAL P/T
P/T MODE
SLOW PAN MAXIMUM
SLOW TILT MAXIMUM
NORMAL PAN MAXIMUM
NORMAL TILT MAXIMUM :
TURBO PAN MAXIMUM
TURBO TILT MAXIMUM
SAVE AND EXIT(ESC TO CANCEL)
: ON / OFF
: SLOW / NORMAL / TURBO
: 19 ˚ - 90 ˚ /second
: 19 ˚ - 90 ˚ / second
: 200 ˚ - 380 ˚ /second
: 90 ˚ - 300 ˚ /second
PASSWORD EDIT SETUP
INPUT PASSWORD
PASSWORD :
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
SAVE AND EXIT (ESC TO EXIT)
: ON
: NORMAL
:
40°/SEC
:
40°/SEC
:
90°/SEC
90°/SEC
: 360°/SEC
: 100°/SEC
(CTRL KEY)
Advertisement
Table of Contents
