Live View Page - Xineron FASTRAX III Instruction Manual

4.4 Live View Page

The live view page comes in seven screen modes like 704x576(480), 704x288(240), 352x288(240),
176x144(120), 640x480, 320x240 and 160x120. Users are allowed to select the most suitable one out of
those modes. Please, adjust the mode in accordance with your PC specifications and monitoring purposes.
1) General controls
The video drop-down list allows you to select a customized or pre-programmed video
stream on the live view page. Stream profiles are configured under Setup > Basic
Configuration > Video & Image.
Please see "4.5.1 Basic Configuration" for more information.
The protocol drop-down list allows you to select which combination of protocols and
2) Control toolbar
The live viewer toolbar is available in the web browser page only. It displays the following buttons:
The Stop button stops the video stream being played. Pressing the key again toggles the start
and stop. The Start button connects to the network camera or start playing a video stream.
The Pause button pause the video stream being played.
The Snapshot button takes a snapshot of the current image. The location where the image is
saved can be specified.
The digital zoom activates a zoom-in or zoom-out function for video image on the live screen.
The Full Screen button causes the video image to fill the entire screen area. No other windows
will be visible. Press the 'Esc' button on the computer keyboard to cancel full screen view.
The Manual Trigger button activates a pop-up window to manually start or stop the event.
The Camera Menu button activates a pop-up window for camera menu control.
The PTZ button activates a pop-up window for Pan, Tilt and Zoom control.
The resolution drop-down list allows you to select the most suitable one out of
video resolutions to be displayed on live view page.
methods to use depends on your viewing requirements, and on the properties of your
network.
The preset drop-down list allows you to select the preset number for the PTZ camera
being used. This icon is inactivated if the PTZ settings are not set.