Dome Setup - Xineron FASTRAX III Instruction Manual

3.13 Dome Setup

• LANGUAGE SETUP
LANGUAGE
• HOME FUNCTION SETUP
HOME FUNCTION
FUNCTION NUMBER
WAITING TIME
FUNCTION ENABLE
The Home function can be set so that the camera automatically goes to Preset, Tour, Pattern, Auto Scan
after the keyboard controller has been idle for a amount of time. For example, if the controller is idle for
120 seconds, the camera goes to preset 1.
Follow these steps to program the Home position:
1. Select Home Function by pushing the Joystick to the right or to the left to scroll through the None,
Tour, Pattern, Auto Scan or Preset functions.
2. Select Function Number and push the Joystick to the right or to the left. The recorded function
number will scroll.
3. Select WATING Time and push the Joystick to the right or to the left to select from 10 to 240
seconds.
4. Select Function Enable and turn to ON or OFF by pushing the Joystick to the right or to the left.
CONFIGURATION MENU
LANGUAGE
HOME FUNCTION SETUP
OSD DISPLAY
VIEW ANGLE SETUP
INITIALIZE DATA
ORIGIN OFFSET
DOME RESET
SYSTEM MENU
SYSTEM INFORMATION
SAVE AND EXIT(ESC TO CANCEL)
: Select the language you want.
HOME FUNCTION SETUP
HOME FUNCTION
FUNCTION NUMBER : ---
WATING TIME
FUNCTION ENABLE : OFF
SAVE AND EXIT(ESC TO CANCEL)
: None/ Tour/ Pattern / Auto Scan / Preset
: - - -
: 10~240 Seconds
: ON/ OFF
: ENGLISH
: NONE
: 120 SEC