Table of Contents
Advertisement
3.7 Tour
(SHORTCUT: TOUR )
There are 8 programmable Tours. Each Tour consists of up to 42 Preset positions, Patterns, Scans or
other Tours (second-level). Using second-level tours, it can be expanded to over 300 functions in a single
tour.
Follow the steps below to program the Tours:
1. Press MENU to display the main menu on the monitor. Scroll to Tour and push the Joystick to the
right to enter the Tour menu. Or just press the TOUR key on the keyboard.
2. Select the" NUMBER" and set the desired number by pushing the Joystick left or right.
3. Choose a blank position to be programmed by pushing the Joystick up, down, right,
or left.
4. To add a stored preset, twist the Joystick then the stored preset number displays.
5. To place functions other than preset, press TOUR , PTRN , or SCAN for Tour, Pattern
or Auto Scan respectively.
6. You can also overwrite the programmed number and to remove a stored number from the Tour, press
the HOME key on the stored number, a blank position mark (---) will be displayed.
7. Repeat Step 2 through 5 for each desired position. Each title will be displayed on top
of the line.
8. To edit the title, follow the procedure of the auto scan above to edit titles
9. Select Save and Exit and push the Joystick to the right. Press ESC to exit the program without
saving.
You can expand the Tour sequence by calling other programmed tours.
NOTE: The speed applies in the vector mode only.
NOTE: In the Tour mode, in conjunction with preset and Auto Scan, you can make the camera travel from a
preset position to another preset position at a specific speed.
NUMBER
TITLE
SCAN TYPE
SPEED
DWELL
003 A08 --- --- --- --- ---
--- --- --- --- --- --- ---
--- --- P01 --- --- --- ---
--- T02 --- --- --- --- ---
--- --- --- --- --- --- ---
--- --- --- --- --- --- ---
SAVE AND EXIT(ESC TO CANCEL)
---
SCAN TYPE
DWELL
003
A08
P01
T02
TOUR SETUP
:
01
:
T01
:
NORMAL
:
5 STEP
:
-- SEC
: blank position
: NORMAL/ VECTOR
: 03-99 Sec
: Preset (1~240)
: Auto Scan (1~8,10~17)
: Pattern (1~8)
: Tour (1~8)
Advertisement
Table of Contents
