Table of Contents
Advertisement
Example : Preset 001>002>003>004>005>006, Auto Scan 01 starts at preset 002, ends at preset 003,
Auto Scan 02 starts at preset 005, ends at preset 006; Tour 001, 002, A01, 004, A02.
To change the dwell time of the preset in the tour:
Use the Joystick to move the cursor to a stored preset position. By pressing PRST key, the camera will
move to the stored Preset view and the cursor moves to the dwell time field. After changing the dwell time,
press PRST key and the cursor moves to the preset number.
To assign the functions other than preset in the tour when the function key is not existed:
Use the Joystick to move the cursor to a stored preset position. Pressing CTRL key or
IRIS OPEN key will change the preset number to other function (auto scan, pattern, tour, preset) with the
first programmed number. To change the number, twist the joystick or press Tele or Wide key.
3.8 Pattern
(Shortcut: PTRN )
The Pattern feature records user control of the selected dome camera. Up to four 8 patterns can be stored
and played back by pressing No.+ PTRN keys subsequently.
Follow steps below to program the Pattern:
1. Press MENU to display the main menu on the monitor. Scroll to Pattern and push the Joystick to the
right to enter the pattern menu. Or just press the PTRN key on the keyboard.
2. Select the desired pattern to be programmed by pushing the Joystick Up or Down. If the pattern is
not 000, a pattern has already been recorded. Patterns can be overwritten.
3. Press and hold down the CTRL key while controlling the camera direction and zoom with the
Joystick . The dome will be automatically recorded until you release the CTRL key. Or Press IRIS
Open then the "CTRL" displays. Move the position and the zoom position. Press IRIS Close then
the "CTRL" disappears.
4. Select Save and Exit and push the Joystick to the right. Press ESC to exit the program without
saving.
5. To edit the title, follow the procedure of the auto scan above to edit titles.
Press the HOME key at any programmed position to delete the pattern.
NOTE:
NOTE: If total recording time reaches 500 seconds, it will automatically stop for a moment.
1
2
2~3
4
where
: Quick move, ~ : Programmed speed
PATTERN SETUP
NO
TITLE
01 :
P01
02 :
P02
03 :
P03
04 :
P04
05 :
P05
06 :
P06
07 :
P07
08 :
P08
TOTAL
SAVE AND EXIT(ESC TO CANCEL)
5~6, repeat
(CTRL KEY)
SEC
PERCENT
000
00.0%
000
00.0%
000
00.0%
000
00.0%
000
00.0%
000
00.0%
000
00.0%
000
00.0%
0000
00.0%
Advertisement
Table of Contents
