Xineron FASTRAX III Instruction Manual page 30

NOTE: Values in ( ) are for PAL Camera.
NOTE: The WDR operates in AUTO1 mode only.
The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera sensitive to
near infrared.
AUTO
GLOBAL
The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, "999" + ENTR will turn Off the NIGHT SHOT mode
and "888" + ENTR will turn On the NIGHT SHOT mode.
ON
OFF
• DNR CONTROL
2DNR(1), 2DNR(2)
3DNR(1), 3DNR(2)
NOTE: DNR(1) applied when motor stopped. DNR(2) applied when motor moving.
Camera goes in to B&W mode at low light.
Controlled by the keyboard.
B/W mode.
Color mode.
DNR CONTROL SETUP
2DNR(1)
3DNR(1)
2DNR(2)
3DNR(2)
SAVE AND EXIT(ESC TO CANCEL)
Select 2D noise reduction level (OFF / 001~007)
Select 3D noise reduction level (OFF / 001~031)
: 001
: 010
: 005
: 002