Table of Contents
Advertisement
- Post-event: This function is the counterpart to the pre-trigger buffer described above and
contains images from the time immediately after the trigger. Configure as for pre-event.
- Prefix file name: This name will be used for all the image files saved. If suffixes are also used,
the file name will take the form <prefix>,<suffix>,<extension>.
- Additional suffix: Add either a date/time suffix or, a sequence number - with or without a
maximum value.
③ ③ ③ ③ HTTP Server
When the network camera detects an event, HTTP Server is used to receive uploaded image files
and/or notification messages. Check the box to enable the service.
• HTTP Server Setting:
- Name: The name of the HTTP event server. Use a descriptive name.
- URL: The network address to the server and the script that will handle the request.
For example: http://192.168.12.244/cgi-bin/upload.cgi
- User name/Password: Provide your log-in information.
• HTTP Server Test:
When the setup is complete, the connection can be tested by clicking the Test button.
Advertisement
Table of Contents
