Table of Contents
Advertisement
• DNS Configuration:
DNS (Domain Name Service) provides the translation of host names to IP addresses on your
network.
- Obtain DNS Server via DHCP: Automatically use the DNS server settings provided by the
DHCP server. Click the View button to see the current settings.
- Use the following DNS server address to enter the desired DNS server by specifying the
following:
* Domain name: enter the domain(s) to search for the host name used by the network camera.
Multiple domains can be separated by semicolons (;). The host name is always the first part of
a Fully Qualified Domain Name, for example, myserver is the host name in the Fully Qualified
Domain Name myserver.mycompany.com where mycompany.com is the Domain name.
* DNS servers: enter the IP addresses of the primary and secondary DNS servers.
• Host Name Configuration:
- Host Name: enter the host name to be used as device information in the client software or
SmartManager.
• Services:
- HTTP port:
Enter a port to receive a service through the HTTP. Default Port Number is '80'.
- RTSP port:
Enter a port to receive a service through the RTSP. Default Port Number is '7070'.
- PTZ port:
Enter a port to control the Pan/Tilt/Zoom. Default Port Number is '7000'.
• ARP/Ping Setting:
- Enable ARP/Ping setting of IP address: The IP address can be set using the ARP/Ping
method, which associates the unit's MAC address with an IP address. Check this box to enable
the service. Leave disabled to prevent unintentional resetting of the IP address.
② ② ② ② DDNS
Advertisement
Table of Contents
