Sun Microsystems SPARC classic Service Manual page 107

UNIT BOTTOM
SBus card
(system option)
System
I/O board
DSIMMs
(fully populated)
Hard drive data cable
Hard drive power cable
FIGURE 9-12
4. Loosen the captive Phillips-head screw that secures the disk drive mounting
bracket to the system chassis.
See
FIGURE 9-13
Lift up the bracket as you loosen the screw until the bracket disengages from the
unit top.
SBus slots
VSIMM module (option on SPARCstation LX only)
Hard drive
Open View of System Unit
and for the screw's location.
FIGURE 9-14
Main logic board
Speaker/Power LED assembly
Keyboard soft power-on cable
Main logic power cable
Diskette drive data cable (optional)
UNIT TOP
Chapter 9
Cable management
guides
Diskette drive
(optional)
Power supply
Storage Devices 9-17