Replacing A Dsimm; Figure 11-10 Removing A Dsimm - Sun Microsystems SPARC classic Service Manual

Note – The DSIMMs are closely spaced. In order to remove a DSIMM, you may
need to remove adjacent DSIMMs first. Keep track of which DSIMMs are installed in
which slots. If you are removing a defective DSIMM, take care not to get it mixed up
with the other DSIMMs.
3.
2.
1.
2.
Removing a DSIMM
FIGURE 11-10
11.3.3

Replacing a DSIMM

The procedure for replacing a DSIMM is the same regardless of the type of SIMM.
Chapter 11 Main Logic Board and Component Replacement 11-15