Sun Microsystems SPARC classic Service Manual page 34

1. The boot parameters represented here are default settings. The defaults may be changed by following the pro-
cedures listed in the Open Boot Command Summary.
Once the operating system is running, you can invoke the Sundiag System Exerciser
if further diagnostic testing is warranted. Refer to Section 2.7 "Sundiag System
Exerciser" on page 2-9 for additional information.
Another standalone diagnostic program you can run is the SunDiagnostic Executive.
Refer to Section 2.9 "SunDiagnostic Executive" on page 2-10 for further information.
To boot user-specified programs, such as the SunDiagnostic Executive, you must be
at the > prompt or ok prompt. See Appendix C "On-Board Diagnostics" for a
detailed procedure on how to access the > or ok prompt.
Note – Remember that the System Exerciser and the SunDiagnostic Executive do
not run on the SPARCclassic X terminal.
2-6 SPARCclassic/SPARCclassic X/SPARCstation LX Service Manual • November 1993