Editing The Eco Profiles; Apply Eco Profile; Setting Time And Date - Uponor Climate Control Zoning System Installation Manual

ECO Night and Day
For example:
ECO mode active:
From 10:30 p.m. to 5 a.m.
From 9:30 a.m. to 2:30 p.m.
ECO Night
For example:
ECO mode active:
From 10:30 p.m. to 5 a.m.
ECO Custom
For example:
ECO mode active:
From 12:30 a.m. to 5:30 a.m.
From 12:00 a.m. to 5:30 p.m.
• Displaying the profiles:
Comfort or ECO mode off.
Economy or ECO mode on.
• All profiles can be modified.
• All customized settings remain saved in the event of
a power failure.

Editing the ECO Profiles

> >
1. Uponor screen Main Menu
>
Edit ECO Profiles
ECO Profiles List
ECO Off
2. Select the ECO profile to modify.
ECO All
>
Press OK.
ECO Night&Day
ECO Night&Day - Heat
3. Modify the heating profile.
00:00 ECO
>
Press OK.
4. To modify the profile:
• Select the time using the and
moves by increments of 30 minutes. The set time is
indicated above the time profile.
• Apply the Comfort mode by pressing the
• Apply the ECO mode by pressing the
5. To set a complete period within the same mode:
• Move the cursor to the start time of the period.
• Set the start time: Press briefly the
• Move the cursor to the end time of the period.
• Press and hold the or
The profile applies for the whole period from start time
to end time.
6. Modify the correction value of
ECO
the temperature setpoint for the
39.2˚F
ECO mode.
>
Press OK.
Uponor Climate Co ˘ ntrol™ Zoning System Installation Guide
Apply ECO Profiles
1. Uponor screen
Apply ECO Profiles.
All
Controller 1
All
1.02 Living
1.07 Gym
MonTueWedThuFriSatSun
MonTueWedThuFriSatSun
ECO Profiles List
ECO Off
ECO All
ECO Night&Day
Settings

Setting Time and Date

1. Uponor screen
Parameters
keys. The cursor
key.
key.
Setting the Time Format
1. Uponor screen
or key.
Parameters
Please choose the
key.
required time format.
24 hour
Setting the Date Format
DD / MM / YYYY
YYYY / MM / DD
DD Mmm YYYY
2. Select the format.
>
> >
Main Menu Settings
2. Select the desired base unit or
Base Unit List
all base unit (only applies if more
than one base unit is installed).
>
Press OK.
Room List
3. Select the desired room or All.
>
Press OK.
Select the day:
System
Go to the day by using the and
keys and select the day by briefly
ECO Off
pressing the key.
4. The present profile is displayed
1.02 Living
5. Select the ECO Profiles mode:
ECO Custom
Press and hold
6. Select the desired ECO Profile.
>
Press OK.
7. Repeat for each day.
To check the setting for a certain day, go to the
days by using and . The current active profile
status profile will display.
Different ECO profiles may be applied to the
thermostat for any day of the week.
If one ECO profile is used in most rooms:
Apply the profile to every room. In step 3, select
the setting All. Then set individual rooms.
> >
Main Menu Settings
> >
Clock Settings Set Date/Time
Toggle between the fields using the
and keys. Change the values using the
and keys.
Set Date/Time
2. Change the time and date.
2 : 02
>
Press OK.
14 Jan 2008
> >
Main Menu Settings
> >
Clock Settings Time Format
Time Format
2. 24 hour or AM/PM
>
Press OK.
AM / PM
1. Uponor screen
Date Format
>
Settings System Parameters
Clock Settings
Press OK.
> >
Rooms
.
>
System
>
System
> >
Main Menu
>
>
Date Format
31