Private Sphere/Security; Turning Ringer Cutoff On And Off; Turning Do Not Disturb On And Off - Siemens HiPath Series Operating Instructions Manual

Private Sphere/Security

Step by Step
Ringer cutoff on?
Ringer cutoff off?
qml
or
DND on?
DND off?
qmk
or
66
Private Sphere/Security

Turning Ringer Cutoff On and Off

You can activate the ringer cutoff function if you do not
want the receive any calls. Calls are only identified by
one ring signal, an indication on the display, and a key
which has been programmed to flash (such as a trunk
key).
Select and confirm.
or
or
rml
Enter the code for "on" or "off".

Turning Do Not Disturb On and Off

You can activate the do not disturb function if you do not
want the receive any calls. When do not disturb is acti-
vated, internal callers hear a busy signal and external
callers are rerouted to a telephone assigned for this pur-
pose (contact your service personnel).
Select and confirm.
or
or
rmk
Enter the code for "on" or "off".
When you lift the handset, a special dial tone
(continuous buzzing tone) reminds you that do
not disturb is active.
Authorized internal callers can automatically
override the do not disturb function after five sec-
onds.