Using Timed Reminders; Turning Do Not Disturb On And Off; Trace Call: Identifying Anonymous Callers (Not For U.s.) - Siemens HiPath 3000 Operating Instructions Manual

Step by Step
or
Consultation

Using Timed Reminders

Precondition: You must have saved a timed remind er
Æ page 31. The current time is the time stored.
Your telephone rings.
Lift the handset and replace it again.
If you fail to answer the timed reminder, it
repeats five times and is then erased.

Turning Do Not Disturb On and Off

You can activate the do not disturb function if you do not
want the receive any calls. When do not disturb is
activated, internal callers hear a busy signal and external
callers are rerouted to a telephone assigned for this
purpose (System Support).
Lift the handset.
Enter the code for "off" or "on".
When you lift the handset, a special dial tone
(continuous buzzing) reminds you that "do not
disturb" is active.
Authorized internal callers can automatically
override the "do not disturb" function after five
seconds.
Trace Call: Identifying Anonymous
Callers (Not for U.S.)
You can have the carrier identify malicious external call-
ers. You can save the caller's station number during the
call or for 30 seconds after the call ends. However, it is
essential that you do not replace your handset during
this time.
You are engaged in an external call.
Press the key. LED flashes. Enter the code.
After you have finished tracing the call, the data
is stored on the carrier 's system. Now contact
System Support.
Making and Answering Calls
13