Black Box 16-Port Rackmount 10/100 Installation Manual page 57

SET Secondary ip_address
SET Software filename
Show Server
Specifies a backup loadhost. The IP address
should be in standard numeric format (no text
names are allowed). The backup loadhost will
be queried if the primary host cannot load the
server.
Specifies the name of the file to load. the Ter-
minal Server will automatically add .SYS to the
filename you specify. Note that all protocols
must have a filename specified (either the de-
fault or set by the user). For more information,
see Appendix 13.
TCP/IP users must use the Software option to
specify the loadhost, the loadfile, and their own
network address.
TFTP users can specify a complete path name
(up to 31 characters) if the file is located in a di-
rectory other than the default. The case of the
filename must match that of the filename load-
ed onto the host computer.
Use this command when issuing other com-
mands to view the current Terminal Server set-
up.
51