Using Menus - Black Box 16-Port Rackmount 10/100 Installation Manual

4.1.4 Using Menus

When you log into a port with menu mode enabled, you will be presented with an initial
login screen.
Black Box LESxx Version B3.6/3 (000410)
Type HELP at the 'Local_10> ' prompt for assistance.
Username>
1
Enter your user name (in this case, Bob) and press Return.
Username> Bob
Press <CR> to continue...
2 As instructed, press the Return key once more to see the actual menu.
Black Box Console Server
1) Cisco Router
2) Sun Server
3) HPUX Server
4) Linux Server
Enter Selection:
3
Choose a menu option. Type the number of the desired option and press Return. For
example, to connect to the Linux server, you would press 2 and then press Return.
4 To return to the menu from your Linux session, press the configured Local Switch
key. In this case, the Local Switch is Ctrl-X (see Figure 4-10).
Switch keys only work within sessions. They do not work from the menu
Note:
screen - you must enter a menu number to go to a session from the
menu screen.
Figure 4-12: Login Screen
Figure 4-13: Login Screen, part 2
Figure 4-14: Login Menu
5) PBX Switch
6) Terminal Server Prompt
7) Logout
8)
15