Protocol Commands - Black Box 16-Port Rackmount 10/100 Installation Manual

Command
{SHOW/MONITOR} PORT 2
TEST PORT 2 option

15.4 Protocol Commands

In the following table, PROTO is an abbreviation for the optional keyword PROTOCOL.
Command
DEFINE PROTO
APPLETALK option
DEFINE PROTO IP
option
DEFINE PROTO
LANMAN option
DEFINE PROTO LAT
option
68
Table 15-2: Frequently-used Port Commands, cont.
Option(s)
COUNT rows
WIDTH cols
POSTSCRIPT
Table 15-3: Frequently-used Protocol Commands
Option(s)
{EN/DIS}
ZONE newzone
{EN/DIS}
GATEWAY ipaddr
IPADDRESS ipaddr
LOADHOST ipaddr
NAMESERVER ipaddr Specifies the IP address of the host that will
{EN/DIS}
{EN/DIS}
LICENSE string
Description
Displays the port's configuration characteristics
once (Show) or continually every three seconds
(Monitor). Counters and Status keywords can be
added.
Sends an ASCII data stream to the port for the spec-
ified number of rows and/or columns.
Sends a PostScript test page to the port.
Description
Enables or Disables the AppleTalk protocol for
the Terminal Server.
Places the Terminal Server in a zone other than
the default.
Enables or Disables the TCP/IP protocol for the
Terminal Server.
See DEFINE SERVER GATEWAY ipaddr.
See DEFINE SERVER IPADDRESS ipaddr.
See DEFINE SERVER LOADHOST ipaddr.
resolve text host names into their numeric equiva-
lents for TCP/IP connection attempts.
Enables or Disables the LAN Manager protocol
for the Terminal Server.
Enables or Disables the LAT protocol for the
Terminal Server.
Enables LAT on multi-port Terminal Servers.
Enter the license string obtained from Black Box.