Black Box 16-Port Rackmount 10/100 Installation Manual page 75

Table 15-3: Frequently-used Protocol Commands, cont.
Command
DEFINE PROTO
NETWARE option
DEFINE PROTO
NETWARE
ENCAPSULATION
option {EN/DIS}
DEFINE PROTO NETWARE LOADHOST
server
PURGE IPSECURITY
option
PURGE PROTO NET-
WARE ACCESS
option
{SHOW/MONITOR} PROTO protocolname
Option(s)
{EN/DIS}
DSCONTEXT string
DSLICENSE string
DSTREE string
NATIVE
ETHER_II
802_2
SNAP
ALL
ipaddress
ALL
server
Description
Enables or Disables the NetWare (IPX) protocol
for the Terminal Server.
Configures the NetWare Directory Services con-
text in which the Terminal Server is located. For
more information about NDS contexts, see your
NDS documentation.
Configures the NetWare Directory Services
license needed to enable NDS on your Terminal
Server. Enter the license string obtained from
Black Box.
Configures the NetWare Directory Services tree
in which the Terminal Server is located. For more
information about NDS trees, see your NDS doc-
umentation.
Configures the Terminal Server to use the "native
mode" frame format.
Configures the Terminal Server to use Ethernet
v2 frame format.
Configures the Terminal Server to use 802.2
frame format with NetWare SAPs.
Configures the Terminal Server to use 802.2
frame format with SNAP SAPs.
See DEFINE SERVER NETWARE LOADHOST
server.
Removes the entire IP security table.
Removes entries from the IP security table that
are related to the specified IP address.
Removes all entries from the NetWare access list.
Removes entries from the NetWare access list that
are related to the specified file server.
Displays operating characteristics of the specified
protocol.
69