Table of Contents
Advertisement
4
Enter the List Protocol NetWare Access command to ensure that at least one of the
file servers in the directory service tree is in the access list.
5
If desired file server is not in the access list, add it.
Local>> DEFINE PROTOCOL NETWARE ACCESS fileserver
6
Reboot the Terminal Server.
6.3 NetWare Administrator Quick Setup
Print Queues
The NetWare Administrator management utility allows you to manage network resources,
such as queue-based print services, in a tree structure. You can either use the Quick Setup
option or individually create printing-related objects.
NetWare Administrator can be used for both NDS and bindery print
Note:
queues.
To create a print queue with the Quick Setup option:
1
Start the NetWare Administrator.
2
In the Directory Tree windows, select the context in which to install the printer.
3
From the Menu Bar, select Tools: Print Services Quick Setup.
4
In the Print Server Name field, enter the name of your Terminal Server (viewable
by entering the Show Server command at the Local> prompt).
5
In the Printer Name field, enter the name of the desired print service configured on
your Terminal Server. For example, LES_xxxxxx.
6
In the Print Queue Name field, enter the name of the print queue to create. The
name should be meaningful to you; it will not affect Terminal Server configuration.
7
Click Create.
8
Reboot the Terminal Server.
32
Figure 6-4: Defining Access List
Figure 6-5: Rebooting
Local>> INITIALIZE DELAY 0
Advertisement
Table of Contents
Troubleshooting
