2.2 Installing the Terminal Server
The following diagram shows a properly-installed LES2700A-16-R3. Installation will
generally be the same for both models, the only difference being the type of serial ports
available. See Terminal Server Product Descriptions on page 3 for more information.
Figure 2-3: Sample Network Layout (LES2700A-16-R3 shown)
Console Terminal
To install the Terminal Server, complete the following steps in order.
1
Attach the two rack mount brackets to your Terminal Server and attach your brack-
eted Terminal Server to your rack. The brackets should go on both front corners or
both rear corners. (This is only necessary if you would like to mount the unit on a
rack.)
2
Connect one or more serial devices to the Terminal Server serial ports.
LES2700A-16
5
4
Modem
Figure 2-4: Rack Mount Bracket Installation
-R3
2
-
3
10/100BASE-T
Ethernet
Serial Printer
Terminal
5