Lpr On Hp Hosts - Black Box 16-Port Rackmount 10/100 Installation Manual

4 From the dialog box that appears, choose remote.
5 From the next dialog box, choose Remote Printing.
6
The Add a Standard Remote Print Queue dialog box will appear. Enter the fol-
lowing information.
The name of the print queue,
The name of the Terminal Server unit,
The name of the Terminal Server service,
The type of print spooler on the remote server, and
A description of the printer on the remote server.
7 A dialog box will appear: "Added print queue les_prt". Click Done.
If you are unable to use SMIT, see the Device Server Reference Man-
Note:
ual on the CD-ROM for UNIX commands used to set up print queues.
8 Print to the queue using normal lp syntax.

5.2.4 LPR on HP Hosts

The System Administration Manager (SAM) allows you to create print queues.
If you are unable to use SAM, the Device Server Reference Manual lo-
Note:
cated on the CD-ROM describes UNIX commands that can be used to
set up print queues.
To create a print queue:
1 At the HP prompt, type sam.
2 From the main application window, choose Printers and Plotters.
3
In the Printers and Plotters window, choose Printers/Plotters.
4
In the pull-down menu, select Remote Printer/Plotter from the Actions menu.
5 The Add Remote Printer window will appear. SAM will prompt you for:
The printer name (the name of the print queue),
28
Figure 5-10: Printing to Queue
% lp -dles_prt filename