Advertisement
2.1
Introduction
The following sections show the internal jumpers setting and the external connectors
pin assignment for application integration.
2.2
System Status Indicators
2.2.1
System Status LED Indicators
The top right LED of the front panel indicates system healthy and active status.
Refer to below table for a LED definition summary.
Item
LED
1
PWR/FAULT
2
SSD
2.3
Jumpers and Connector
2.3.1
Jumper Description
You may configure the ITA-260 to match the needs of your application by settingj
umpers. To close a jumper, you remove the clip. Sometime a jumper will have three
pins, labelled 1, 2 and 3. In this case you would connect either pins 1 and 2, or 2 and
3.
ITA-260_Series User Manual
Figure 2.1 ITA 260 LED
Status
Color
Description
On
Green
System power is on, system is safe
On
Red
System voltage overheated
On
Data being received/transmitted
Yellow
Off
No data being received/transmitted
Open
Closed
8
2-3 Closed
Advertisement
