Removable Media Drives - Mitsubishi Electric APRICOT FT4200 Owner's Handbook Manual

F r o n t p a n e l s a n d d r i v e s
5. Fit the circlip into the hinge as shown in the following illustration:
Figure 5-9 Fitting Circlip
1. Circlip

Removable Media Drives

To gain access to the removable media drives and the System Management
Controller (SMC) you must first remove the protective metal plate which
covers this area.
2
Figure 5-10 Removing Protective Metal Plate
1. Securing Screws
2. Protective Metal Plate
1. Remove the securing screws.
2. Use the finger holes near the top left and right-hand corners to lift the
plate away from the server.
5/6
2
1
2. Top Hinge of Drive Bay Door
1
3. Hard Disk Subsystem
3