Table of Contents
Advertisement
U P S a n d b a t t e r y p a c k
10
UPS AND BATTERY PACK
Warning
Warning
Read completely the instructions detailed in chapter 3 at the beginning of the
service section.
The UPS unit consists of the actual power supply and the accompanying
battery pack. The unit is very robust but is very heavy, approximately 35 Kg
including battery pack.
If you are going to remove the power supply, always do it as a single unit.
Do not remove the battery pack first. The unit is severely out of balance
without the battery pack and could unexpectedly roll over as you remove it.
Warning
Warning
It is essential that you use the utmost care when removing the UPS in order to avoid
injury to yourself or damage to the unit. Do not attempt to remove or fit the unit
alone. There should always be at least one other person available to help you.
Before you begin, ensure that the server is in a suitable area with plenty of
work space. Then, use the jacking mechanism in the front castors to anchor
them firmly to the floor so that the server cannot roll about.
1
2
Figure 10-1 Front Castor Adjustment
1.
Adjustment Wheel
2.
Jacking Pad
10/1
Advertisement
Table of Contents
