Mitsubishi Electric APRICOT FT4200 Owner's Handbook Manual page 88

Table of Contents

Advertisement

Description
The architecture of your server supports symmetrical multiprocessing (SMP)
and a variety of operating systems. The server is equipped with both PCI
(Peripheral Component Interconnect) and EISA (Extended Industry
Standard Architecture) busses. The standard removable media bays can
house a variety of storage devices, such as tape backup or CD-ROM. One
3.5-inch floppy drive comes with every server.
The System Management Controller (SMC) monitors your system and
reports problems. The methods that the SMC uses to communicate the
status of the system are as follows:
Hexadecimal codes sent to the Front Panel liquid crystal display (LCD)
Audible beep codes and alarms
Detailed information is available in the System Management
Application, a Windows software program specially designed for the
server. This application, which you can run on another computer
remotely (via modem, serial, or network link), alerts you if there are
problems such as component failure, overheating, security breaches and
power failures.
The SMC communicates with the motherboard by means of the System
Management Interface Card which occupies the lowest EISA slot.
The 1-kilowatt Uninterruptible Power Supply (UPS) provides power for the
server during short breaks. It has its own removable battery pack, but is also
removable as a complete assembly.
General
Dimensions
Height
Length
Width
Weight
Temperature
Operating
Storage (In suitable packaging)
Airflow
A gap of at least 15 cm must be allowed clear around the server to allow for
adequate air circulation.
T e c h n i c a l i n f o r m a t i o n
Including castors
Excluding castors
Max (with 20 drives)
Incl. packing
750 mm.
670 mm.
790 mm.
410 mm.
115Kg.
140Kg.
o
o
0
to 50
C
o
o
-40
to 70
C
200 CFU
11/3

Advertisement

Table of Contents
loading

Table of Contents