Table of Contents
Advertisement
To gain access, it is required to remove the protective metal plate which
covers the upper part of the electronics chamber. On completion of any
work it is important to replace this panel for airflow integrity.
1.
Remove the securing screws as shown in the following diagram:
Figure 2-3 Protective Metal Plate
1.
Protective Metal Plate
2.
Lift the metal plate away from the metalwork.
Memory and CPU locations
This diagram shows the positions of the CPUs and main memory:
Figure 2-4 Memory, CPU and Clock switches
1.
VRM for processor 'B'
2.
DIMM sockets 1-4
3.
Processor 'B'
4.
Processor 'A'
2
1
7
U p g r a d i n g a n d E x p a n s i o n
2.
Securing Screws
5.
DIMM sockets 5-8
6.
VRM for processor 'A'
7.
Clock and multiplier SWs
1
2
3
4
5
6
2/3
Advertisement
Table of Contents
