Mitsubishi Electric APRICOT FT4200 Owner's Handbook Manual page 7

N o t i c e s
IMPORTANT
Power Cable Connections - UK ONLY
This equipment is supplied with an AC power lead that has a non-removable
moulded plug. If the AC supply outlets to be used are not suitable for the
lead supplied with this computer, a new complete and suitable power lead
should be obtained. If this is not possible, the existing plug should be cut off
and the following guidelines observed:
Warning Warning
The plug severed from the mains lead must be destroyed, as a plug with the bared
flexible cord is extremely hazardous if engaged in a live socket outlet.
The following wiring information should be employed when adding any
replacement plug.
The wires in the power lead are coloured in accordance with the following code:
Green and Yellow
Blue
Brown
The colours of the wires in the mains lead supplied with this computer may
not correspond with the markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured green-and-yellow must be connected to the
terminal in the plug which is marked with the letter E, or by the earth
symbol or coloured green or green-and-yellow.
WARNING WARNING
THIS APPLIANCE MUST BE EARTHED.
The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black. The wire which is coloured
brown must be connected to the terminal which is marked with the letter L
or coloured red.
Always replace the fuse with one of the same type and rating, always replace
the fuse cover, never use the plug with the fuse cover omitted.
Replace with same colour fuse cover only. Replacement fuse covers may be
obtained from your dealer.
This diagram shows the wiring inside the moulded plug. Use it as a guideline if
you need to re-fit a plug of a similar type to the AC lead.
SAFETY/4
Earth
Neutral
Live
E
L
N