Table of Contents
Advertisement
U P S a n d b a t t e r y p a c k
Fitting
1.
Make sure that the battery pack power connector is visible and
accessible.
2.
Carefully lift the battery pack over the 'end-stop' and slide it far enough
into the chassis to reconnect the battery pack power connector.
Figure 10-13 Plugging the Battery Pack Power Connector
3.
Push the pack the rest of the way into the chassis, lifting slightly to pass
over the 'stop'.
Figure 10-14 Refitting the Battery Pack
4.
Use the screws as shown in the previous diagram to secure the battery
pack.
10/10
Advertisement
Table of Contents
