Table of Contents
Advertisement
Warning
Warning
This Power supply is heavy. It is strongly advised to have a second person with
you to assist before you either fully remove the assembly from the server, or pick it
up to fit it into its position in the server.
10. The second person should assist you, on the opposite side of the unit,
from this point onwards.
11. Place your hands under the metal casing of the unit as indicated by the
arrows in the following illustration:
Figure 10-6 Power Supply Removal
12. Slide the unit out slowly until it is free from its housing. Now rest the
unit on the floor. Do not drop it.
Fitting
1.
With the help of the second person on the opposite side, place your
hands underneath the power supply as indicated by the arrows in the
illustration above.
2.
Now carefully slide the unit all the way into the chassis.
U P S a n d b a t t e r y p a c k
10/5
Advertisement
Table of Contents
