Outputting All Jobs In The Printer - Xerox Document Centre 400 series User Manual

3.3 Outputting

3.3.2 Outputting all jobs in the printer

To execute and print all jobs received in the printer.
This operation can stop the receiving of data and empty the buffer.
The procedure is as follows:
32
There is also a way to erase all jobs in the printer. Refer to "3.2.3 Cancelling all jobs
in the printer" regarding the way to erase.
For parallel and serial interfaces, data might be received in the midst of a job
depending on the timing when
In this case, all data following this will be recognised as a new job after
pressed and then processed as a new job after the pause state is released in Step
After the pause state is released here, data that have been treated as a new job will
not be printed properly if the PDL Mode is set to AUTO.
"5.3 Common Menu Items" regarding the PDL Mode setting.
When the display is at the state as shown on
the left, press .
The Pause mode is activated.
When is pressed, the printer will
automatically be unable to receive data.
Press .
The printing starts.
When all the jobs have been executed and
printed, "Pause" will be shown.
is pressed in Step .
Press .
"Print/Fax Ready" will be shown.
is
.